LOADED (NoWrap)

About the LOADED

This cue is tuned for the opening shot. A painted maple core is carbon‑reinforced for stability, then dressed with wide double‑silver rings with graphite overlay, a polished chrome butt cap, and matching aluminum joint protectors. The Quick Release pin keeps setup fast and secure.

Those double red grip lines aren’t just decoration. Thanks to the proprietary butt construction, orienting the lines vertically (up/down) favors clean energy transfer for effortless speed, while a horizontal (side‑to‑side) orientation emphasizes compact pop. Pick the wrapless build for a slick release or the extended rubber sport wrap if you like extra traction—either way, the visual lines make it easy to repeat the hold you like rack after rack.

Up front, the break shaft uses a slightly more conical profile for backbone on impact. Face size is 12.9 mm, paired with JFlowers’ proprietary epoxy‑infused leather break tip—a combo that keeps the hit short, square, and predictable so you can swing smooth and still move the rack. Standard build is 58 inches and typically around 19.5 oz.

Extras you’ll appreciate: All JFlowers cues ship from Jacksonville, Florida for North America and direct from the factory for international orders (typical transit: US ~4–5 days, International ~7–8 days).

__________________________________________________________________

Design Highlights

• Two builds: Wrapless for a fast release or extended rubber sport wrap that reaches the butt for confident low grips.
• Orientation tuning: Use the double red grip lines as a guide—vertical for efficient transfer, horizontal for compact power (enabled by proprietary butt construction).
• Construction & look: Painted maple core with carbon reinforcement, bold LOADED red branding, double‑silver rings with graphite overlay, and a polished chrome butt cap.
• Hardware & spec: Quick Release joint with matching aluminum joint protectors, 58 in overall, about 19.5 oz balance for confident acceleration.

__________________________________________________________________

Why Choose This Cue

You want a breaker that adapts to your table and stroke. LOADED lets you flip the grip for the feel you want—transfer or power—while the carbon build and QR hardware keep the hit firm and repeatable.

__________________________________________________________________

Popular FAQs

Q: Do I need to re‑assemble the cue to change orientations?

A: No. Just rotate the butt in your grip hand so the lines face the way you want—no tools needed.

Q: The wrap runs to the butt—does that help taller players?

A: It does. If you grip low, the extended wrap keeps your hand on traction instead of sliding onto a glossy finish, which makes stance and reach easier to dial in.

Q: How do I properly chalk a phenolic or epoxy infused tip?

A: Great question! These extra hard tips are notorious for resisting chalk. Instead of the typical swirling of the chalk around the tip, it is best to “paint on” the chalk by using short brush style strokes to cover. We have also found that the Taom V10 line seems to paint on best!

Experience the next level of performance, precision, and style with the LOADED break cue. Break boundaries, not the bank—elevate your game today!

.

TECHNICAL SPECIFICATIONS

Available in striking jet black with red accents, the LOADED pairs seamlessly with the RPG jump cue (pictured below) for a bold, battle-ready combo that demands attention. Take advantage of the holiday special on the RPG Jump Cue today!

Prefer a wrap? Check out the LOADED Sport Wrap.